• Smooth aluminum with grip material
• 88" wide
• (2) steel fold up ladders
• Stair step rear access
• 32" high railing at operator stations with black vinyl padding on side rails
• (2) Bostrom air-ride suspension seats
• Powder coated white
• Welded on canopy

• Pneumatic lift with swivel caster tire
• 6' to 10' extension, collapsible for transport

• Medium duty steel parallel arm style; single center swivel caster wheel mounted behind rear tires
• Pneumatic lift with lift switch in each SC-12 Master Control Box
• Auto-hold transport brackets
• Outrigger single tube-in-tube construction with wear pads
• Orbital steering motor power steering with wheel and spinner knob
• Zinc plated adjustable brackets & rods

• 230-gal capacity 2 compartment stainless steel tank; with splash area; holds 115-gal. white, 115-gal yellow
• Coated interior surfaces with graphite-based coating for easy clean-out
• (2) hydraulic paint agitators, 1 per color selection

• (3) Graco Model 238-377
• #1 gun on left carriage dual color plumbed
• Handgun plumbed to white surge chamber; 25' hose whip

• (2) 13.0 GPM pumps with manual control
• Cam & groove fitting at inlet of each HP paint pump
• (2) HP canister paint filters 18 sq. in each with drain port
• (2) 1" HP-check valves
• (2) ASME surge chambers - 1 per color

• (2) diaphragm load/charge pumps with 100 sq. in. with drain valve; 1 per color

• 1000 lb bead capacity with 2" sight level glasses
• Screen in neck of tank
• Vacuum bead loading with jet pump & muffler
• (1) 12' transfer hose with king nipple

• (3) Graco Model 238-338 guns

• 74 hp

• (2) pumps; (1) pressure compensated piston pump & (1) gear pump
• 50-gal reservoir
• 50 gpm hydraulic oil cooler with preset temperature switch

• 85 cfm
• Air tank
• Two stage air dryer with auto ejector drain
• (2) Air take-offs - one on each side by gun carriages with quick connect fitting
• Humphrey Model M310 air solenoids

• (2) Skip-Line, Inc. Model SC-12 controllers
• (3) gun actuator switches
• (2) gallon counts - one per color

• David Clark 3 station system with (1) single earpiece headset and (2) dual earpiece headset
• (3) headset storage hooks 

• (2) LED 360-degree strobes - one on each front corner of the deck
• (2) LED 360-degree strobes - one on each rear corner of the canopy
• (2) LED 180-degree mini strobes; one on each gun carriage
• (1) Arrow stick

•    Steel construction
•    96” wide
•    Two steel hinged ladders
•    Diamond Vogel® Meteor Metallic Gray Powder Coat
•    Hinged gates for material pallet access
•    36” high bent-tube rails
•    Perforated aluminum side safety panels
 

•    Dual tube-in-tube outrigger construction with wear pads
•    Steel construction, aluminum paneling
•    Auto-hold transport bracket
•    Parallel arm lift & trail carriage design
•    Material gun
     ·  Quick-response pneumatic valves
     ·  Oil-jacketed material delivery chamber
     ·  Hydraulic cylinder actuation
     ·  Raise & stow system for transport
•    Gravity feed chute for marker transport between carousel & carriage

•    Temporary storage chamber for marker
delivery
•    Parallel-arm marker delivery system
•    Patent Pending zero velocity marke
 

•    Arrow oil-jacketed material chamber
•    80-gal (1000 lb) capacity
•    Integrated always-on material agitator
•    Hydraulic motor with adjustable pressure bypass
•    Bituminous recirculation system to gun reducing cold starts
•    Flexible oil jacketed heated bituminous hoses
 

•    Adjustable oil temperature control
•    Shutoff valves for oil isolation
•    In-cab controls for safety reset & startup
•    Diesel-fired Beckett Burner

•    Honda 23 hp gas engine
•    Controls at engine
•    Separate 7-gal CARB compliant fuel tank
•    Separate 12V battery

•    Unique carousel design
•    Easily removable cartridges for quick reloading
•    Air-pressure marker delivery mechanism
•    Cartridges designed to fit PPG’s Stimsonite C80 model markers
•    Electric drive motor
•    Store up to 400 markers
•    Automatic rotation for continuous marker

•    12-gal hydraulic oil tank
•    15gpm pressure compensating pump
•    Oil distribution hydraulic block for controlling:
      ·  Agitator
      ·  Material pump
      ·  Material gun raise/lower & actuation
      ·  Heat transfer oil pump
      ·  Outrigger extension
•    Temperature controlled oil cooler fan
•    Integrated switch-controlled hydraulic bypass

•    30 cfm displacement @ 100 psi
•    12-gal air storage tank
•    LaMan extractor/dryer with auto drain
•    Carriage lift valve
•    Solenoid valves for electronic flow control
 

•    24V & 12V integrated systems
•    Master Controller in chassis cab
•    Electrical distribution panel mounted on deck
•    System shutoff & lockout switches
•    Switch control panel console in chassis cab
•    12” touchscreen interactive display & control panel

•    Two amber mini lightbars mounted on chassis roof bracket
•    Two rear-facing 180-degree amber strobes on rear of deck
•    Two carriage strobes for better forward and rearward visibility

•    2000-lumen work lights for night-time operations
•    Remote-adjustable roof-mounted laser guidance
•    Telematics for remote troubleshooting & data transfer

•    Equipment monitoring camera system
      ·  Carriage Front
      ·  Carriage Back
      ·  Carousel

• Smooth aluminum with grip material strips
• 96"x151" deck
• 8" risers to provide room for the suspension
• (2) operator baskets mounted in front of the rear tires
• Basket is no greater than 6" from the pavement during operation, providing EZ application
• Baskets adjustable depending on need
• Swing gates hinged out away from the deck
• Powder coat color decided by customer
• (2) 18"x18"x24" toolbox mounted on rear

• Adjustable output up to 13 cubic inches per stroke
• Shot size adjustment with mechanical stroke limiter for simplicity and ease of service

• Capable of heating up to 500lbs of bituminous material, air jacketed melter
• Welded steel melting tank
• Melting tank has a hinged 12"x8.5" loading hatch with a total open area of 102 square inches
• Lid is designed to close away from operator with locking pin
• Melting kettle requires an agitator with the bypass always "ON" which prevents scorching of the material
• The tank is LP fired using and impinged jet-type burner with an output of 150,000 BTU/hr

• Melter kettle comes equipped with a continuous, full sweep hydraulic agitation system to prevent filler from falling out of suspension, and to speed the melting rate of the material

• 10 foot hose with an applicator pistol
• A type "J" thermocouple-type temperature sensor is attached to the stainless-steel over-braid
• (1) Duck bill applicator

• Kawasaki air-cooled, four cycle, single cylinder engine
• 18 HP at 3,600 RPM
• Propane operation with 100lb propane tank
• High efficiency air-cooling fan
• 14-20 CFM air compressor

• .66 displacement rotary piston hydraulic pump; belt driven
• 8-12 gallon oil reservoir
• By-pass ball valve for easy auxiliary engine
• Oil cooler 12 VDC assembly
• Bituminous pump

• The melter applicator has digital electronic temperature controllers that will automatically regulate the material temperature and the hose temperature
• The material thermostat controls burner ignition automatically up to 450 deg. F
• Pumps are controlled by a 12-volt DC, 4-way electrically operated hydraulic valve

• National Signal 25 LED lamp 3 foot by 6 foot actuated arrow board with controller in chassis cab

• David Clark Model U3800 three station with one H3492 single earpiece headset & one Model H3432 dual earpiece headset
• Three headset storage hooks

• Two Whelen Model L41AP amber LED 360-degree strobes on front of deck
• Two Whelen Model 70A02FAR amber directional light heads on rear deck
• One Whelen Model LINV2A mini amber LED 180-degree strobes on baskets, one per basket

• Six Hella 2,000 lumen LED work lights

• Smooth aluminum with grip material strips
• 96" wide
• 42" wide high railings with mid-rail
• 32' high railing with mid-rail and bump-out operator stations
• Welded on canopy to protect rear operators from sun
• Bostrom air ride operators seats with seatbelts & tethers
• (1) 18" x 18" x 24" toolbox mounted on rear

• Pneumatic lift with swivel caster tire
• 6' to 10' extension, collapsible for transport

• Heavy duty steel parallel arm style gun carriages mounted in front of rear tires
• Single 13" diameter aircraft style tires center swivel caster wheel
• Pneumatic lift with lift switch in each SC-12 Master Control Box
• Auto-hold transport brackets
• Outrigger dual tube-in-tube construction with UHMWPE wear pads; 60' extension
• Orbital steering motor power steering with wheel and spinner knob
• Zinc plated adjustable brackets & rods

• 500-gal paint capacity using tote draw paint supply systems
• 2" hookup fittings
• 1" LP paint recirculation
• 4 web straps provided for securing paint totes - 2 per tote
• Deck cutouts with cam & groove fittings for tote hose hookup when totes are removed

• (3) Graco Model 238-377 

• (2) Titan 13.0 GPM pumps with manual control
• (2) ASME surge chambers
• HP paint filter on each and pressure relief at each HP paint filter
• HP paint hoses .5" ID with .5" ID female swivel stainless steel fittings on both ends. 

• 3000lb capacity bead tank with step
• (3) 2" sight glasses
• Screen in the neck of tank
• Vacuum bead loading with 2" by 12' load hose with 3' stinger

• (3) Graco Model 238-338 with 1" ID poly spring reinforced hoses

• Boss Industries Model FT4 210DUS (Final Tier 4) 210 cfm @ 100 psi
• Utility mount with controls at rear operator's station
• 12-gal air tank
• Air jet dusters for surface prep
• Model 111F LaMan extractor/dryer with auto drain
• (2) Air take-offs - one at each gun carriage

• 30-gal hydraulic oil reservoir with 10-micron return line filter and 10-micron cartridge breather filter
• (1) pressure compensated hydraulic pump direct driven by John Deere 4045D Tier 4 Final auxiliary engine part of Boss Industries utility mount air compressor
• Five foot carriage extension
• Hydraulic oil cooler with 12-volt DC fan with temperature switch
• Solenoid controlled hydraulic bypass switch for easy start of auxiliary engine.

• Mid-size console
• Skip-Line, Inc. Model SC-12 timer system with (2), four-line Master Boxes with air jets switch and gun actuator switches
• 3-position alternate cycle switch
• 2-gal counts - 1 per color
• Heavy-duty magnet wrap

• David Clark Model U3800 (3) station with one H3492 single earpiece headset & two Model H3432 dual earpiece headsets
• (3) headset storage hooks

• (2) Whelen Model L41AP amber LED 360 strobes front of deck
• (2) Whelen Model 70A02FAR amber LED directional light heads on rear of canopy railing
• (2) Whelen Model LINV2A mini amber LED 180 strobes on carriages, one per carriage

• Smooth aluminum with grip material
• 88" wide
• (2) steel fold up ladders
• Stair step rear access
• 32" high railing at operator stations with black vinyl padding on side rails
• (2) Bostrom air-ride suspension seats
• Powder coated white
• Welded on canopy

• Pneumatic lift with swivel caster tire
• 6' to 10' extension, collapsible for transport

• Medium duty steel parallel arm style; single center swivel caster wheel mounted behind rear tires
• Pneumatic lift with lift switch in each SC-12 Master Control Box
• Auto-hold transport brackets
• Outrigger single tube-in-tube construction with wear pads
• Orbital steering motor power steering with wheel and spinner knob
• Zinc plated adjustable brackets & rods

• 230-gal capacity 2 compartment stainless steel tank; with splash area; holds 115-gal. white, 115-gal yellow
• Coated interior surfaces with graphite-based coating for easy clean-out
• (2) hydraulic paint agitators, 1 per color selection

• (3) Graco Model 238-377
• #1 gun on left carriage dual color plumbed
• Handgun plumbed to white surge chamber; 25' hose whip

• (2) 13.0 GPM pumps with manual control
• Cam & groove fitting at inlet of each HP paint pump
• (2) HP canister paint filters 18 sq. in each with drain port
• (2) 1" HP-check valves
• (2) ASME surge chambers - 1 per color

• (2) diaphragm load/charge pumps with 100 sq. in. with drain valve; 1 per color

• 1000 lb bead capacity with 2" sight level glasses
• Screen in neck of tank
• Vacuum bead loading with jet pump & muffler
• (1) 12' transfer hose with king nipple

• (3) Graco Model 238-338 guns

• 74 hp

• (2) pumps; (1) pressure compensated piston pump & (1) gear pump
• 50-gal reservoir
• 50 gpm hydraulic oil cooler with preset temperature switch

• 85 cfm
• Air tank
• Two stage air dryer with auto ejector drain
• (2) Air take-offs - one on each side by gun carriages with quick connect fitting
• Humphrey Model M310 air solenoids

• (2) Skip-Line, Inc. Model SC-12 controllers
• (3) gun actuator switches
• (2) gallon counts - one per color

• David Clark 3 station system with (1) single earpiece headset and (2) dual earpiece headset
• (3) headset storage hooks 

• (2) LED 360-degree strobes - one on each front corner of the deck
• (2) LED 360-degree strobes - one on each rear corner of the canopy
• (2) LED 180-degree mini strobes; one on each gun carriage
• (1) Arrow stick

• Aluminum smooth plate with a grip material, 88" wide x 177.5" long
• (2) fold up ladders
• (2) operator seats mounted on lockable tool storage boxes
• 32" high railings at operator stations with mid-rails & black vinyl padding on side rails.
• Stair step rear access; chrome grab handles
• (1) 5# & (1) 10# fire extinguishers
• Powder coated white
• Welded on canopy to protect operators from the sun

• Medium duty front of rear tires; standard single tire installed in a center swivel with pneumatic lift and auto lock storage brackets
• Positioned using steering sectors; steering wheels with spinner knobs
• Outrigger double tube-in-tube construction with UHMWPE wear pads; 60" extension
• Zinc plated adjustable bracket & rods

• 120-gal capacity
• (2) 60 Gallon Tanks

• (2) Titan 8.6 GPM “plated” pumps; manual control
• (2) ASME surge chambers
• 2" Wye strainer at the inlet of each HP paint pump
• HP paint filter at each pump outlet
• Pressure relief/paint recirculation at each HP paint filter
• Paint Loading using HP paint pumps at low pressure
• 1.5" x 12' load hose with stinger per pump with stand tube storage

• 750lb capacity bead tank with 2" sight glasses
• Screen in neck of tank
• Vacuum bead loading using shop air compressors (at least 60 cfm)

• Honda 23 hp gas engine
• Controls at engine
• Separate 7-gal CARB compliant fuel tank
• Separate battery

• Hoffman electrical box
• Skip-Line, Inc. Model SC-12 controller system with carriage lift switch
• Switch control panel console in chassis cab

• David Clark U3800 system: (1) dual muff Model H3432 headset for the rear operator; (1) single muff model H3492 headset for driver; (3) storage hooks for headsets, (1) chassis cab & (2) OP area